Chimney Top — Caps, Covers & Draft · Anchor Component

Architectural Multi-Flue Shroud (Decorative)

A shroud is the one item on this counter bought purely for how the house looks, and we'd rather say that than dress it up. Maintenance-wise it's undemanding — it sheds water off the crown and adds a wash-down to the annual visit. Two things to know before spending: it won't improve draft, and a shroud over a crown that's already cracking just hides the crack from the roofline. We check what's underneath first, because covering a problem is the expensive way to delay it.

Specification

What the listing decides

Store fit: Quote-to-fabricate

How this part is bought

The part follows the finding

No part in this store is a loose transaction. This one links back to the graded inspection that surfaces the need, and across to the install service it belongs to — both performed by the same trained crew.

Upstream

Chimney Inspection

The graded inspection that documents the need for this part before it ships.

Start here

Installed by

Chimney Cap Installation

The install service this component attaches to, fitted to its listing by the same crew.

See the work

Every store quote includes

A fit check — flue size, alloy, venting, and clearances verified against your inspection
Written installed pricing before anything is ordered
Installation to the component's listing by trained technicians
Documentation that closes the finding — so the warranty, your insurer, and the next inspector all see a job done right

Chimney Top — Caps, Covers & Draft

Request a quote

No price is listed — that’s the standard, not a sticker. Installed pricing depends on your flue, alloy, venting, and access, and we confirm it in writing after a fit check. No payment is taken online.

Specify your custom cap

Built to your figures by our fabricator. Spec it here; every measurement is verified on the fit check before a single cut.

Cap style

Size variant

Material

Gauge

Pre-painted color

Color shown only on pre-painted metal — the finish family the fabricator prints from.

Outside measurements

Whole inches plus the fraction, for each side: A (top), B (right), C (bottom), D (left).

A — Topin

B — Rightin

C — Bottomin

D — Leftin

Add 1/2" of clearance to each of the A, B, C and D outside measurements before you submit — Plano fabricates to these exact figures, so the extra half-inch is what lets the finished cap seat over the masonry. I've added the 1/2" clearance to A, B, C and D.

Flue holes

Inside-hole measurements run from the outside edge to the edge of each hole, numbered from the top, then from the left — one pair per flue.

Number of flues

Hole 1

Skirt height

Leg height

Add-ons — available, priced on quote

Rush — faster turnaroundAvailable — priced on quote. (Plano's rush is a 2-business-day fabrication; we confirm the upcharge in writing, never a sticker price online.)Lifetime warrantyAvailable — priced on quote. Plano backs the fabrication for life; we confirm the cost in writing with the rest of the installed quote.

Every figure rides into the quote as your stated spec — confirmed on the measured fit check before fabrication. No price is taken online.

Include professional installationFitted to its listing by the trained crew as Chimney Cap Installation. Leave it on — most parts here are a safety system, not a box you fit on a Saturday.

Pick a preferred window next — we confirm it by phone

(214) 393-5261

Keep browsing

More from the Chimney aisle

Copper Chase Cover (Custom-Fabricated)

Think of a chase cover as a roof over the part of your chimney nobody looks at, and price it the way you'd price a roof — per decade, not per invoice. Copper is the version you buy once: no coating to fail, so there's no rust clock running from the day it's installed. On our plan a copper top drops to a visual check each year and essentially nothing else. Fair warning before you commit: it will go from bright penny to dark brown to green, and that change is permanent.

View pageQuote

Integrated Crown-Cap Unit (Drip-Edge Crown + Cap)

A masonry crown is a maintenance item forever — it cracks, you seal it, it cracks again, and eventually you rebuild it. This unit ends that cycle by taking the crown out of the weather entirely: one stainless top capping every flue with an overhang that throws water past the brick. Over a ten-year window it's usually cheaper than the rebuild-and-reseal pattern it replaces. The honest cost is aesthetic — it reads as metal, and on a decorative chimney some homeowners won't accept that.

View pageQuote

Powered Draft System (Enervex / Exhausto Inducer + Modulating Control)

This is the most maintenance-heavy item we sell and we won't pretend otherwise. A roof fan with a modulating control is genuinely effective on a flue that can't draft naturally, and it's also a motor, a sensor and a control board living outdoors — it needs annual service and it will eventually need parts. We only reach for it after we've ruled out the fixable causes, because the cheapest draft fix is nearly always the one that doesn't plug in.

View pageQuote

Everything in Chimney Top — Caps, Covers & Draft

15+

Years on Crews

Visits a Year

Surprise Fees

< 2hr

Response

Ready when you are

Talk to a real chimney tech today.

Free written quote. Same-week scheduling. 24/7 emergency response when you need it.

Book Free Inspection (214) 393-5261

Licensed & Insured Same-Week Scheduling Written Quote, Always

Emergency

24/7 Response

Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.

Emergency line